Author Topic: Gruby's WIP  (Read 22290 times)

Offline Cassiel

  • Administrator
  • Hero Member
  • *****
  • Posts: 1470
    • Email
Re: HomeLab DATfiles
« Reply #15 on: October 15, 2009, 12:03:51 PM »
And think the chars should be added in with Firmware rather than seperate..

Sorry to be picky, all the work you've done on this lesser known system has been really appreciated!   :)

Offline Cassiel

  • Administrator
  • Hero Member
  • *****
  • Posts: 1470
    • Email
Re: Microkey DatfilesPack
« Reply #16 on: October 15, 2009, 12:07:50 PM »
It might be worth doing seperate DATs if the systems are distinct (eg if some some software only runs on newer, more sophisticated hardware)...   ;)

Offline Gruby

  • TOSEC Member
  • Jr. Member
  • **
  • Posts: 50
  • Gruby
    • My Homepage
Re: HomeLab DATfiles
« Reply #17 on: October 15, 2009, 12:08:11 PM »
Thanks
Reply #3 is corrected (Again)  ::)
EmuControlCenter Datfilemanager - Redump.org Dumper.
Sorry my BadEnglish, I am an old Hungarian man.

Offline Cassiel

  • Administrator
  • Hero Member
  • *****
  • Posts: 1470
    • Email
Re: HomeLab DATfiles
« Reply #18 on: October 15, 2009, 12:09:52 PM »
Good stuff....  ;)

Offline TKaos

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 533
Re: HomeLab DATfiles
« Reply #19 on: October 15, 2009, 12:09:59 PM »
PacMan v1.0 (2005)(Imre Solti)(beta)[CALL $5000][requires CHAR2].htp

You might want to change more info to [req CHAR2] ?
Depends on what you think is better, right now in Atari 8bit I'm using [req OSb], I think we should both have the same way of writing "requires", feel free to tell me your opinion about this.
I don't mind to change the [more info] fields in Atari 8bit, I just copied that short form from the old maintainer.

Offline Cassiel

  • Administrator
  • Hero Member
  • *****
  • Posts: 1470
    • Email
Re: HomeLab DATfiles
« Reply #20 on: October 15, 2009, 12:11:30 PM »
Yes, 'req' please in general for all DATs

Offline Gruby

  • TOSEC Member
  • Jr. Member
  • **
  • Posts: 50
  • Gruby
    • My Homepage
Re: HomeLab DATfiles
« Reply #21 on: October 15, 2009, 12:16:55 PM »
TOSEC Naming Convention Page 24:
• [requires TRS‐DOS]

I use this TNC
http://www.tosecdev.org/index.php/tosec-naming-convention
tnc_v2008-07-20.pdf
If have a newest version, please send me a link.
« Last Edit: October 15, 2009, 12:22:26 PM by Gruby »
EmuControlCenter Datfilemanager - Redump.org Dumper.
Sorry my BadEnglish, I am an old Hungarian man.

Offline TKaos

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 533
Re: HomeLab DATfiles
« Reply #22 on: October 15, 2009, 12:23:05 PM »
You got a point there, I personally always tried to not extend the filenames too much, that's why I'm using "req" which should be understandable for everyone.

Offline Cassiel

  • Administrator
  • Hero Member
  • *****
  • Posts: 1470
    • Email
Re: HomeLab DATfiles
« Reply #23 on: October 15, 2009, 12:27:33 PM »
Good spot!! Didn't even realise that in TNC as example.

Personnally, I think 'req' best (and assumed that was what in TNC tbh!), but does anyone else have an opinion?

TKaos - just writing you a longish PM, until browser suddenly decided to close so you getting 'abrigded version' in few mins. hahaha....

Offline PandMonium

  • Administrator
  • Hero Member
  • *****
  • Posts: 1323
Re: HomeLab DATfiles
« Reply #24 on: October 15, 2009, 12:40:53 PM »
nice to see you guys working, i'm waiting to see your new dats and point out the mistakes :P

about the tnc, nice finding Gruby :)
those examples are almost all from the last tnc from tosec.info and they need to change, i (or any of you if you want) needs to update the document with new codes, new rules and a bunch of new examples, since more info flags are 'free' for anything it is indeed difficult to control them but i tend to agree that the less size possible is better (maintaining the info understandable), similar more info flags for similar cases is great because you can just list those sets searching by it, please use req then :)

edit: just changed the webpage, the pdf will be updated later, if any of you have fixes to do in tnc or want to add new articles (faqs, guides, ...) just let me know...
« Last Edit: October 15, 2009, 12:45:43 PM by PandMonium »

Offline Gruby

  • TOSEC Member
  • Jr. Member
  • **
  • Posts: 50
  • Gruby
    • My Homepage
Re: Microkey DatfilesPack
« Reply #25 on: October 15, 2009, 05:19:02 PM »
Why ?
Commodore Amiga A1000 Datfile is exists ?
or A1200 or A500 or etc...
Or your problem is the computer name Microkey Primo and Not Commodore ?
« Last Edit: October 15, 2009, 05:21:25 PM by Gruby »
EmuControlCenter Datfilemanager - Redump.org Dumper.
Sorry my BadEnglish, I am an old Hungarian man.

Offline Gruby

  • TOSEC Member
  • Jr. Member
  • **
  • Posts: 50
  • Gruby
    • My Homepage
Re: HomeLab DATfiles
« Reply #26 on: October 16, 2009, 06:46:11 AM »
HomeLab Pack is Uploaded
EmuControlCenter Datfilemanager - Redump.org Dumper.
Sorry my BadEnglish, I am an old Hungarian man.

Offline idoru

  • TOSEC Contributor
  • Full Member
  • ***
  • Posts: 200
Re: HomeLab DATfiles
« Reply #27 on: October 16, 2009, 09:37:17 AM »
Thanks Gruby, I've replaced the old set of HomeLab dats with these new ones in the current dats stem.  

Would you mind filling in some missing files I have for HomeLab (& MicroKey) ?  I can't locate them all on your website & I don't like releasing a dat if I don't know for 100% sure that the files are available.  I'll put some CMPro fixdat files in your directory on the ftp if that's OK with you ?  Thanks ;)
« Last Edit: October 16, 2009, 09:43:32 AM by idoru »

Offline idoru

  • TOSEC Contributor
  • Full Member
  • ***
  • Posts: 200
Re: Microkey DatfilesPack
« Reply #28 on: October 16, 2009, 09:47:35 AM »
I think there's enough MicroKey dats as it is, so can't see any problem with adding system flags if they're required. 

Looking at the older set of dats, would Primo-A/Primo-B/Primo-A64/Primo-B64 be in 1 set & Pro-Primo be separated out as before ?  Or is this not necessary with the MicroKey system ?

Offline Gruby

  • TOSEC Member
  • Jr. Member
  • **
  • Posts: 50
  • Gruby
    • My Homepage
Re: Microkey DatfilesPack
« Reply #29 on: October 16, 2009, 10:14:03 AM »
Microkey Primo Datfiles
software:
Microkey - Primo - Applications - [D64]
Microkey - Primo - Applications - [PRI]
Microkey - Primo - Applications - [PTP]
Microkey - Primo - Demos - [PRI]
Microkey - Primo - Demos - [PTP]
Microkey - Primo - Docs - [PRI]
Microkey - Primo - Docs - [PTP]
Microkey - Primo - Educational - [PRI]
Microkey - Primo - Educational - [PTP]
Microkey - Primo - Firmware
Microkey - Primo - Games - [PRI]
Microkey - Primo - Games - [PTP]
Microkey - Primo - Sources
Microkey - Primo - Various - [Multipart]
Microkey - Primo - Various - [PRI]
Microkey - Primo - Various - [PSS]
Microkey - Primo - Various - [TXT]
Microkey - Primo - Various - [WAV]

Scans:
Microkey - Primo - Books
Microkey - Primo - Manuals - Hardware
Microkey - Primo - Manuals - Software
EmuControlCenter Datfilemanager - Redump.org Dumper.
Sorry my BadEnglish, I am an old Hungarian man.